Configure Closed Wedge Socket
Product key features
- Rope Ø: ¾ - 3 inch
- Rope Ø: 17 - 75 mm
- MBL USTons: 35,3 - 573,2
- MBL Mtons: 32 - 520
Description
With the Closed Wedge Socket from De Haan SE, a wire can be attached with a temporary connection. By tightening the wedge/wire combination in the cone, the connection is secured. If the wedge/wire combination is pushed back to loosen the connection, the end of the wire can be reeved. The connection can be fixed by fastening the wedge-wire construction again.
The brace of the socket fits on the standard bow shackles. For more information about the Closed Wedge Sockets, see our ‘Warning & Application Instructions‘.
Your wire supplier can provide you with information about the minimum breaking load of the Wedge Socket with wire. To ensure that our product information is uniform and up-to-date, these product specifications of the Closed Wedge Sockets are also presented in English.
Material: Steel
Working Load Limit: 20% of the MBL
Finish: Painted or Galvanised (<Type No. 6 standard galvanised)
Temperature Range: -40°C up to 200°C / -40°F up to 392°F
Standard Certificates: Certificate of Conformity, 3.1 Material Certificate EN 10204
Non-standard sizes or custom products available on request.
Key features
With pin or with safety pin
Rope Ø min. ¾ inch – max. 3 inch
Rope Ø min. 17-19 mm – max. 75 mm
Conditions for optimal performance
- Availability
- 3D Engineering
- Just in time supply
- Technical advise
- Commercial department
- Digital offer inquiry
- Digital product platform
- In-house production